Description

Nordic Pure MERV 7 Plus Carbon air filters are made of a dual material where the MERV rated material has been fused together with a carbon layer. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty 2-part, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 7 Plus Carbon air filters are comparable to air filters with the rating of MPR 600. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 14 x 25 x 1, Actual Size: 13 1/2 x 24 1/2 x 3/4 (13.5 x 24.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - MERV rated synthetic poly blend pleated media plus activated charcoal flat panel added to increase odor control

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - This dust reduction air filter is ideal in keeping your AC and furnace equipment working efficiently and helps reduce odors

Description

Nordic Pure MERV 8 Pleated AC Furnace Air Filters provide exceptional filtration for both home and commercial environments. MERV 8 furnace filters are comparable to HVAC filters with the rating of MPR 800. Nordic Pure furnace air filters are manufactured using a heavy-duty 2-part, moisture resistant beverage board frame. As with all Nordic Pure furnace air filters, the material is electrostatically charged to attract unwanted particles. For fresh, clean air in your home and office, it is important to regularly change your AC filter, especially during home improvements. We recommend changing your HVAC furnace filter every 1-3 months, depending on your unique home or office environment. People with pets or those who suffer from allergies should change their A/C air filters more often. Replacing your air filter regularly not only improves indoor air quality, it helps your HVAC unit perform more efficiently. Important Note: Almost all air condition filters have a different Actual Size than Nominal Size printed on the air conditioning filter. It is best to measure the exact size of your A/C filter and compare it to our Actual Size to be sure your HVAC replacement filter fits!

Features

• - Nominal Size: 18 x 18 x 1, Actual Size: 17 3/4 x 17 3/4 x 3/4 (17.75 x 17.75 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Made with MERV rated synthetic poly blend pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - This dust reduction air filter is ideal in keeping your AC and furnace equipment working efficiently

Description

Nordic Pure MERV 10 Plus Carbon air filters are made of a dual material where the MERV rated material has been fused together with a carbon layer. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 10 Plus Carbon air filters are comparable to air filters with the rating of MPR 900-1000. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 12 x 12 x 1, Actual Size: 11 3/4 x 11 3/4 x 3/4 (11.75 x 11.75 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Two beneficial air filters in one - MERV rated synthetic poly blend activated carbon infused pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for customers who not only need odor control but whose daily life demands high filtration

Description

Nordic Pure Pleated Air Filters MERV 14 are made of electrostatically charged synthetic materials that attract and capture most airborne particulates in your home. Each time air passes through a Nordic Pure in. Pleated furnace filter it removes contaminants from the air. All Nordic Pure in. Pleated air filters are manufactured using a heavy duty, moisture resistant beverage board frame with a metal mesh support grid bonded to the in. Pleats. MERV 14 furnace air conditioner filters are comparable to HVAC filters with the rating of MPR 2800. It is important to note that because of this high filtration and air flow restriction, HVAC systems should be rated to handle filters of MERV 14 and above. Nordic Pure MERV 14 air filters work great in newer, high efficiency systems that use HEPA filters. The effective life of your AC air filter depends on both the inside and outside conditions in which you live. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the Exact size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits.

Features

• - Nominal Size: 18 x 24 x 1, Actual Size: 17 1/2 x 23 1/2 x 3/4 (17.5 x 23.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Made with MERV rated synthetic poly blend pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for customers with health problems or for commercial units which support a rating of MERV 14 and above

Description

Features

• - High-Performance Motor: Powered by a 2800W motor delivering up to 1200 BPM, this demolition jack hammer tackles heavy-duty tasks with speed and efficiency—ideal for both home use and commercial projects

• - Ergonomic Design: The 360° adjustable handle of the jack hammer ensures optimal positioning and control, reducing fatigue during extended use. Its secure and comfortable grip provides steady handling even in tough conditions

• - Built to Last: Featuring a one-piece aluminum alloy housing, this demolition hammer is both lightweight and strong. Paired with alloy steel chisels, it withstands harsh job sites while minimizing wear

• - Efficient Cooling: A built-in cooling system keeps the motor running at lower temperatures, extending the jack hammer concrete breaker's life and ensuring reliable performance during long demolition sessions

• - Versatile Chisels: Our electric jackhammer includes four chisels: flat, point, clay spade, and scraper. Designed to handle demolition, trenching, cracking, and hole making on concrete, masonry, brick, tile, and plaster. Ideal for pipe and plumbing

Description

The Chamberlain B4310 delivers ultra-quiet, reliable performance—perfect for attached garages where keeping the peace matters most. Its smooth belt drive and DC motor minimize noise while maximizing convenience. An included battery backup ensures you’re never locked out, even when the power’s out. A built-in video camera keeps an eye on what matters most, and with the myQ app, you can open, close, and monitor your garage from anywhere. Whether you're across town or settled in for the night, you’ll always know your garage is secure. Easy to use, thoughtfully designed, and built for everyday life—it’s a powerful step up for any home.

Features

• - Power Outage Protection: Ensure uninterrupted access during power failures. Battery Backup keeps you in control when it matters most, for safety and peace of mind.

• - Ultra-Quiet Operation: With a reinforced belt drive and ultra-quiet DC motor—ideal for garages near living spaces or bedrooms.

• - Smart Access for Smart Homes: Wi-Fi connected garage door opener and the myQ app let you control your garage from your phone—anytime, anywhere. Built-in video monitoring helps you keep eyes on what matters, bringing modern convenience to your fingertips.

• - Advanced Power for Bigger Demands: Choose the right horsepower for the job—from everyday reliability to higher-cycle performance. Our 3/4 HP motor* is designed for frequent use, delivering smooth, consistent operation and long-term durability.

• - Bright When You Need It Most: Illuminate your entire garage with 2 Bulb lighting—providing front and rear coverage for safer, more complete visibility whenever you need it. Bulbs sold separately.

• - See What’s Happening — Anytime, Anywhere: Monitor activity in real time with wide-angle video and smart access via the myQ app—enhancing security, visibility, and control.

• - Built to Last — Backed with Confidence: Protected by a robust 5 year motor and belt warranty, this opener reflects Chamberlain's commitment to lasting performance and peace of mind.

• - Control Without Leaving Your Car: Whether you’re pulling in or backing out, two 1-button remotes give you fast, reliable control from the comfort of your vehicle.

• - Instant Control at Your Fingertips: Open or close your garage and turn on the lights with the Multi-Function Wall Control.

• - Accessory Compatibility: Your included accessories come ready to use with your new garage door opener. Most older accessories are not compatible.

Description

Nordic Pure MERV 12 Pleated AC Furnace Air Filters provide exceptional filtration for both home and commercial environments. MERV 12 furnace filters are comparable to HVAC filters with the rating of MPR 1500-1900. Nordic Pure furnace air filters are manufactured using a heavy-duty 2-part, moisture resistant beverage board frame. As with all Nordic Pure furnace air filters, the material is electrostatically charged to attract unwanted particles. For fresh, clean air in your home and office, it is important to regularly change your AC filter, especially during home improvements. We recommend changing your HVAC furnace filter every 1-3 months, depending on your unique home or office environment. People with pets or those who suffer from allergies should change their A/C air filters more often. Replacing your air filter regularly not only improves indoor air quality, it helps your HVAC unit perform more efficiently. Important Note: Almost all air condition filters have a different Actual Size than Nominal Size printed on the air conditioning filter. It is best to measure the exact size of your A/C filter and compare it to our Actual Size to be sure your HVAC replacement filter fits!

Features

• - Nominal Size: 16 x 24 x 1, Actual Size: 15 1/2 x 23 1/2 x 3/4 (15.5 x 23.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Made with MERV rated synthetic poly blend pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for high efficiency air filtration and will help those with moderate allergies and asthma.

Description

PROTARP Extra Heavy Duty 16 Mil Tarp Cover, Waterproof, UV Resistant, Rip and Tear Proof, Poly Tarpaulin with Reinforced Edges for Roof, Camping, Patio, Pool , Boat. (Black 25′ X 40′)

Features

• - FINISHED SIZE: PROTARP sizing for the tarps are finished size which means when you choose your size you get the full size tarps and it’s not short a few inches from both sides like other companies.

• - 100% VIRGIN POLYETHYLENE: Most tarps are made with recycled or mixed materials. PROTARP, on the other hand, uses pure, virgin, non-recycled polyethylene, that's why our multipurpose tarp is super durable and won’t tear, rip or rot. PROTARP heavy duty poly tarp is built to last.

• - STRONG GROMMETS & REINFORCED EDGES: The protective tarp has a 14 x 16 weave count, reinforced edges and metal grommets every 18 inches. The tear-resistant material is super durable while the metal grommets allow you to tie down the tarpaulin cover easily, using bungee cords or a strong rope.

• - CONVENIENT MULTIPURPOSE DESIGN: You can use this plastic tarp sheet to cover many different kinds of objects, like roofs, boats, pools, outdoor furniture, or you can use it to make canopy tents, go camping, cover the floors when you paint, and much more.

• - UV RESISTANT, WATERPROOF AND WEATHERPROOF: You can use the ultra-thick tarp throughout the entire year, whether it’s windy, raining, snowing or raining. The premium poly tarp is weatherproof, waterproof and UV resistant and it will protect any object from all extreme weather conditions.

Description

The Amerock BP36905ORB Monument 1-3/16 inch (30mm) Length Knob is finished in Oil-Rubbed Bronze and sold in a pack of 25. The modern square design of Monument offers sleek, sophisticated allure with a contemporary European twist, making a bold statement with a refined touch. Adding depth to any space, the rich burnished nature of Oil-Rubbed Bronze sparkles with copper brush marks and embraces the beauty and craft of old-world artistry. Founded in 1928, Amerock’s award-winning home solutions including decorative and functional cabinet hardware, bath accessories, decorative hooks and wall plates have built the company’s reputation for chic design accessories that inspire homeowners to express their personal style. Amerock offers a variety of styles and finishes at affordable prices that add the perfect finishing touch to any room.

Features

• - Effortless Elegance: The contemporary design offers a simple yet sophisticated upgrade to cabinet drawers, doors, or furniture, complementing a variety of décor styles.

• - Built to Last: Crafted from high-quality zinc for exceptional durability and long-lasting performance.

• - Convenient Value Pack: Includes 25 pieces and all necessary mounting hardware for quick and hassle-free installation.

• - Versatile Home & Furniture Hardware – Ideal for cabinet doors, drawers, dressers, and furniture upgrades, adding a stylish touch to any room.

• - Easy Installation, Trusted Brand – Includes mounting hardware for quick setup. Amerock has been a leader in decorative and functional cabinet hardware since 1928.

Description

Nordic Pure MERV 8 Plus Carbon air filters are made of a dual material where the MERV rated material has been fused together with a carbon layer. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty 2-part, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 8 Plus Carbon air filters are comparable to air filters with the rating of MPR 800. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 14 x 20 x 1, Actual Size: 13 1/2 x 19 1/2 x 3/4 (13.5 x 19.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Two beneficial air filters in one - MERV rated synthetic poly blend activated carbon infused pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for customers who need odor control for pet and cooking smells

Description

The Bora Tool Parallel Clamp delivers exceptional clamping pressure and performance with an easy-to-use design. The 3.5-inch padded jaws slide up and down with a simple lift of the handle, and they automatically become parallel as you tighten them on your project. Precision clamping has never been so easy.

Features

• - ULTIMATE WOOD WORKING CLAMP SET - This set includes two 18" parallel clamps and two 24" parallel clamps covering a broad range of woodworking tasks from gluing, joinery, small frames, to larger case assemblies. Making them an essential addition to your wood working tools and accessories.

• - 3.5 INCH WIDE PADDED JAW - The 3.5-inch wide reversable padded jaw delivers a broad, uniform surface of clamping force to gently but firmly grip or spread your workpiece—no marring or crushing—even when winding tight. The reversable jaw also allows for easy and quick cabinetry work.

• - 1,100 POUNDS OF CLAMPING PRESSURE - Backed by 1,100 lb (500 kg) of clamping force, these bar clamps for woodworking can tackle the most demanding wood working applications—ideal for cabinets and furniture builds, glue-ups, boxes, carcass builds, and strong joinery work.

• - ERGONOMIC HANDLE FOR EASY ADJUSTMENTS – A large, easy-grip handle allows you to quickly lift and slide the jaw into position, giving you smooth movement and greater control—ideal for one-handed use when setting up your bar clamps for woodworking.

• - PASSIVE LOCK JAW FOR SECURE POSITIONING – The built-in lever released jaw feature holds the lower jaw in place while tightening, preventing slippage and ensuring accurate, consistent clamping pressure every time. Allows for easy bar clamp opening, closing, and adjusting.

Description

Nordic Pure MERV 13 Plus Carbon air filters are made of electrostatically charged synthetic materials with an added flat panel infused with activated charcoal that attracts and capture most airborne particulates in your home. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty 2-part, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 13 Plus Carbon air filters are comparable to air filters with the rating of MPR 2200-2400. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 14 x 24 x 1, Actual Size: 13 3/4 x 23 3/4 x 3/4 (13.75 x 23.75 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - MERV rated synthetic poly blend pleated media plus activated charcoal flat panel added to increase odor control

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for customers looking for superior filtration capturing fine particles, including coughs & sneezes, smog and smoke, but also needing an odor control element

Description

The WORX 20V 18-gauge brushless brad nailer provides high driving power without the hassle of compressors, hoses, or gas cartridges. Unlike traditional pneumatic nailers, this battery powered nail gun lets you move freely and set up quickly. With Air Impact Technology, this brad nailer electric drives nails up to 2-⅛" into hardwood, making it perfect for installing baseboards, window and door trim, and wainscoting. Beyond its driving power, this cordless brad nailer with battery includes features that enhance precision and ease of use. Its narrow nose design improves visibility and accuracy, contact actuation mode enables continuous nailing while single mode allows precise shots, and a built-in triple LED light illuminates dark spaces. As a bare tool, it's ready to integrate seamlessly into your PowerShare arsenal. New to PowerShare? This unique battery platform lets you use 20V, 40V and 80V tools with the same batteries and charger.

Features

• - PowerShare battery system: Combine 20V batteries to power any Worx tool—20V, 40V, or 80V. Need more power? Just add batteries.

• - [High driving power] Drive nails up to 2-⅛" into hardwood with this brad nailer cordless using Air Impact Technology

• - [Lightweight design] This electric nail gun features a lightweight design for less fatigue

• - [Cordless design] Eliminate hassles from heavy compressors, long hoses, and gas cartridges with this cordless brad nailer

• - [Triple LED light] Illuminate dark spaces with the built-in triple LED light on this battery nail gun

• - [Dual modes] This battery-powered nail gun offers contact actuation for continuous nailing and single mode for precise nailing

• - [Brushless Motor] This electric brad nailer features a brushless motor for extended runtime and efficiency

• - [Quick and safe jam clearing] Tool-less jam release with anti-ejection design clears nails quickly and safely on cordless nail guns

• - What's included: (1) 20V 18-gauge brushless brad nailer (WX838L.9), (1) 20V 2.0 Ah lithium battery (WA3669), (1) 20V 2 A quick charger (WA3881), (1) carry bag (WA0087), (3000) 18-gauge brad nails, (1) belt hook.

• - PowerShare battery system: Combine 20V batteries to power any WORX tool—20V, 40V, or 80V. Need more power? Just add batteries.

Description

Features

• - Whole House Water Filtration with Pre-Filter Protection – This home water filter system includes the WSP50J jumbo spin-down sediment filter as the first stage, capturing sand, dirt, and rust before water enters the main whole house water filter system. It helps prevent clogging, extends the life of your 3-stage water filter, and maintains strong water pressure—ideal for both city and well water applications.

• - SGS-Tested PFAS Reduction – The FC25B-PF filter uses independently tested media to remove up to 99% of PFAS contaminants such as PFOA and PFOS. This PFAS water filter ensures safe, great-tasting water from every faucet—perfect for households seeking top-performing water filters that remove PFAS.

• - Long-Term Scale Defense – Featuring the FWDS150K filter, this whole house water filter system includes a powerful scale inhibitor that helps prevent calcium and magnesium buildup. It extends the life of pipes, appliances, and water heaters in homes with hard water or scale issues.

• - Powerful Heavy Metals Removal – The FG25B-KS water filter uses granular activated carbon (GAC) and KDF media to reduce common water pollutants like lead, mercury, chlorine, chloramine, radon, and hydrogen sulfide. Ideal for whole house water filtration system setups in homes using city or well water.

• - Comprehensive Contaminant Protection - the iSpring WGB32B-PFKDS whole home water filter system delivers robust protection through a 3-stage design featuring KDF + GAC, high-performance carbon block, and a premium anti-scale filter. It effectively reduces PFAS, chlorine, heavy metals, and scale, providing clean, health water throughout your home.

• - High Capacity & Long-Lasting Filters – Designed for long-term use, this whole house water filtration system processes up to 100,000 gallons or lasts up to 12 months, depending on water quality. A reliable water filter system for home users seeking performance and longevity.

• - DIY-Friendly Installation – The system features standard 1” NPT inlet/outlet ports and 20” x 4.5” filter housings for compatibility with most home plumbing. Comes with an easy-to-follow user manual and online tutorials to streamline the installation of your water filter system for home.

• - Sealed for Freshness – Every whole house water filter cartridge is individually wrapped to preserve shelf life and ensure top-quality filtration. Open just before use for peak performance in any home water filter system whole house configuration.

• - U.S.-Based Support with Warranty – Backed by a 1-year limited warranty and lifetime technical support from our knowledgeable U.S. customer service team. Whether you need advice on installation or maintenance, we’re here to support your whole house water filtration system investment.

• - Important Note – This system preserves healthy minerals and does not lower TDS levels. If you need to reduce total dissolved solids, explore iSpring reverse osmosis systems—an excellent add-on for your water filter system for house or whole home water filtration setup.

Description

Nordic Pure MERV 8 Plus Carbon air filters are made of a dual material where the MERV rated material has been fused together with a carbon layer. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty 2-part, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 8 Plus Carbon air filters are comparable to air filters with the rating of MPR 800. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 20 x 20 x 1, Actual Size: 19 1/2 x 19 1/2 x 3/4 (19.5 x 19.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Two beneficial air filters in one - MERV rated synthetic poly blend activated carbon infused pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - Ideal for customers who need odor control for pet and cooking smells

Description

The fluid lines of the Arvo® Bath Collection bring a delicate, serene look to the bath. The Arvo Bath Faucet simplifies cleaning with a nimble pull-down spray wand featuring MagnaTite® Docking, making it easy to quickly clear away toothpaste and other sink messes. Delta® MagnaTite Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. WaterSense® labeled faucets use at least 20% less water than the industry standard — helping you save water without compromising performance. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.

Features

• - PULL DOWN SPRAYER: The pull down bathroom faucet makes quick work of cleaning toothpaste and dirt from your bathroom sink. MagnaTite Docking uses a powerful magnet to snap the pull down sprayer into place so it stays docked and doesn’t droop over time

• - EASY DIY INSTALLATION: Purposefully designed to install in 5 simple steps, with step-by-step instruction videos and tips available on Delta Faucet’s YouTube channel. The 3 hole bathroom faucet fits 3-hole 4 in. centerset installations

• - RELIABLE CERAMIC VALVE: Ceramic disc valve cartridge is tested to last at least 500,000 uses to ensure high performance with less drips and a smooth bathroom faucet handle operation

• - CORROSION-RESISTANT FINISH: Our Brilliance finishes are intentionally engineered for durability and tested for corrosion resistance to at least 2 times industry standards

• - NO LEAD COMPLIANT: Every Delta faucet is certified to NSF/ANSI Standard 61, which sets the criteria for product safety. Not all bathroom faucets are certified, so it is important to always check for NSF/ANSI 61 certification when buying a faucet

• - EASY-TO-CLEAN DRAIN: Push pop-up drain unscrews from above the deck for quick removal and easy cleaning of hair and other bathroom sink debris

• - LIFETIME LIMITED WARRANTY: You can install with confidence, knowing all Delta bathroom faucets are backed by our warranty

Description

Features

• - BADGER 5XP 3/4 HP GARBAGE DISPOSAL W/ CORD: 12.63-inch height, 6.31-inch width InSinkErator garbage disposal; includes all flanges, gaskets, bolts, etc., necessary for installation, plus jam-buster wrenchette and kitchen drain stopper

• - DURABLE AND LONG-LASTING: Sink disposal featuring 3/4 HP Dura-Drive induction motor for maximum grinding power and durability; a single stage of grind to handle everyday food scraps; rugged, rust-resistant, stainless steel grind components

• - EASY DIY: ″Twist-On, Twist-Off″ Quick Lock Mount for fast replacement of existing InSinkErator food waste disposer; Lift and Latch technology for easier install of sink garbage disposal; kitchen appliance assembled in USA with factory-installed power cord

• - COMPACT GARBAGE DISPOSER: Space-saving design that easily fits under sink, leaving room for other kitchen necessities and small kitchen appliances, like an instant hot water dispenser

• - INSINKERATOR BOOST System with Septic Guard (BST-SG) FOR INSINKERATOR GARBAGE DISPOSALS: 7.82-in tall by 4-in square BOOST Accessory device, Septic Guard solution, mounting kit and screws, power adapter, disposal dishwasher inlet plug, tubing, etc.

• - ADDED ASSURANCE FOR HOMES ON A SEPTIC SYSTEM**: Septic Guard liquid formula that’s non-corrosive to plumbing and scientifically proven to support the digestion of solids, helping to break down food waste buildup in your home’s septic system** and pipes

• - HELPFUL ODOR REDUCER: Septic Guard liquid with fresh citrus scent that helps reduce undesired kitchen sink odors

• - DIY INSTALL AND REFILL CHANGE: INSINKERATOR BOOST System dishwasher inlet adapter that attaches directly to the disposal dishwasher inlet plug with option to use power adapter or four AA batteries; click-into-place design for Septic Guard refill bottles

Description

Features

• - ✅【3 USB Ports, 30W Total Output】 Features one USB C and two USB A ports, providing a combined 30W to efficiently charge multiple devices simultaneously. Built-in protocol chips ensure optimal charging for all devices. Compatible with all kinds of USB devices with multiple charging protocols including Apple Protocols, Samsung Protocols and Standard BC1.2. Note: Does not support fast charging; Not suitable for laptops.

• - ✅【Matte Finish & Screwless Wall Plate】 The elegant matte surface enhances modern decor, and the durable thermoplastic housing resists impacts and scratches. Comes with a sleek, screwless wall plate for a seamless, stylish look.

• - ✅【Durable and Safe】Our USB outlets feature efficient power solutions with advanced cooling, reducing heat for safer use and longer product life. Fire-resistant materials, child-proof shutters, and ultra-quiet performance ensure both safety and comfort. USB C tested for 10,000 insertions, USB A for 8,000—built to last.

• - ✅【High Energy Efficiency】 Achieves up to 87% energy efficiency according to DOE & CEC lab testing. Meets the Department of Energy Level VI, with extremely low standby power consumption of less than 75mW.

• - ✅【UL Certified & 3-Year Product Support】ELEGRP USB outlets rigorously tested to meet UL1310 & UL498 standards for safety and reliability. Backed by 3 years of product support, ensuring long-term performance and customer satisfaction.

Description

Features

• - Integrated L.E.D. battery charge level indicator allows user to monitor battery charge

• - Provides up to 65% more run time per charge compared to BL1830

• - Reaches full charge in 45 minutes or less

• - Compact design for close Quarter cutting

• - Variable speed (0 - 3,000 strokes per minute) combined with a 1/2" stroke length for faster and more efficient cutting

• - Makita exclusive dual-position on/off switch allows for either paddle or trigger switch operation

Description

Nordic Pure MERV 7 Plus Carbon air filters are made of a dual material where the MERV rated material has been fused together with a carbon layer. It will help eliminate unwanted odors as well as trap most airborne dust and particulate matter for fresh, clean air. Odorous gases and vapors (VOC) are attracted to and held by the activated carbon material while maintaining excellent air flow properties. All Nordic Pure pleated air filters are manufactured using a heavy duty 2-part, moisture resistant beverage board frame. There is a metal mesh support grid bonded to the pleats for extra support. Our air filters use permanently electrostatically charged material that acts like a magnet to help dust cling to the air filter. MERV 7 Plus Carbon air filters are comparable to air filters with the rating of MPR 600. We recommend that you change your air filter every 30-90 days to maintain maximum efficiency and economy. Important Note: Almost ALL furnace filters have a different "actual size" than the nominal size printed on the air conditioner filter. It's best if you measure your air filter for the EXACT size and compare it to our "Actual Size" - and then you can be sure your A/C air filter fits!

Features

• - Nominal Size: 16 x 20 x 1, Actual Size: 15 1/2 x 19 1/2 x 3/4 (15.5 x 19.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - MERV rated synthetic poly blend pleated media plus activated charcoal flat panel added to increase odor control

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - This dust reduction air filter is ideal in keeping your AC and furnace equipment working efficiently and helps reduce odors

Description

Nordic Pure MERV 7 Pleated AC Furnace Air Filters provide good filtration for both home and commercial environments. Our MERV 7 furnace filters are comparable to HVAC filters with the rating of MPR 600. Nordic Pure furnace air conditioner filters are manufactured using a heavy-duty 2-part, moisture resistant beverage board frame. The filter media is electrostatically charged to attract unwanted particles. MERV 7 filters are better at trapping airborne particles than fiberglass filters. For fresh, clean air in your home and office, it is important to regularly change your AC filter to improve indoor air quality and help your HVAC unit perform more efficiently. We recommend changing your filter every 1-3 months, depending on your environment. People with pets or those who suffer from allergies should change their A/C air filters more often. Important Note: Almost all air condition filters have a different Actual Size (the exact dimensions) than Nominal Size (the name) printed on the air conditioning filter. It is best to measure the exact size of your A/C filter and compare it to our Actual Size to be sure your HVAC replacement filter fits.

Features

• - Nominal Size: 20 x 25 x 1, Actual Size: 19 1/2 x 24 1/2 x 3/4 (19.5 x 24.5 x 0.75)

• - Measure your air filter for the exact size and compare it to our actual size to ensure proper fit.

• - Made with MERV rated synthetic poly blend pleated media

• - Nordic Pure recommends changing 1" air filters every 30-90 days

• - Made in the USA: Proudly manufactured in the USA, ensuring quality and supporting local production

• - This dust reduction air filter is ideal in keeping your AC and furnace equipment working efficiently

Description

Features

• - The information below is per-pack only

• - LOCKING PRIVACY: Use on doors requiring privacy, can be locked inside with a turn button and unlocked outside with provided release tool. Recommended for bedrooms and bathrooms

• - EASY INSTALL: Do it yourself, installs in minutes with just a screwdriver, all the hardware you need is included for a hassle-free installation, detailed directions provided

• - FITS STANDARD DOORS: Fits standard size doors 1-3/8" to 1-3/4" thick, adjustable latch backset from 2-3/8" to 2-3/4" with just a twist during installation

• - BOX INCLUDES: Exterior and Interior Knobs, Screws, Adjustable Latch, Strike Plate, Emergency Unlock Tool, Installation Hardware, Install Guide

• - CERTIFIED TRUSTED QUALITY: Security, Durability and Finish are Grade 2 BHMA certified, designed to withstand everyday use and common forced entry break-in methods

• - WARRANTY PROTECTION: Our products are backed by a lifetime mechanical and finish warranty with great customer service, see Kwikset warranty for more details

• - MICROBAN PROTECTION: Kwikset’s door hardware is treated with Microban, this offers powerful product protection that is 99.9% cleaner than an unprotected surface

• - TRANSITIONAL DESIGN: Available in a beautiful, transitional door hardware style with simple, unique details to match your home décor

Description

InSinkErator Power .75HP, 3/4 HP Garbage Disposal Power Series EZ Connect Continuous Feed Food Waste Disposer + InSinkErator BOOST Injection System with Septic Guard Solution System Maintenance BST-SG

Features

• - INSINKERATOR POWER .75HP 3/4 HP GARBAGE DISPOSAL: 12-inch H x 8.25-inch W disposal with EZ Connect Hardwire Adapter, garbage disposal flange, gaskets, etc., for install, plus wrenchette and kitchen drain stopper; EZ Connect Power Cord sold separately

• - DESIGNED TO PREVENT CLOGS: Sink disposal with 2-Stage MultiGrind Technology designed to prevent clogs by grinding food scraps finer; 3/4 HP Dura-Drive induction motor for maximum durability; removable baffle for easy cleaning

• - DIY EZ CONNECT SINK GARBAGE DISPOSAL: USA-assembled kitchen appliance with EZ Connect Hardwire Adapter, EZ Removable Dishwasher Inlet Plug, and Lift and Latch technology for the easiest installation of an InSinkErator food waste disposer

• - REDUCED SOUND AND COMPACT: Garbage disposer that operates with reduced noise levels compared to standard disposals; space-saving design that easily fits under sink, leaving room for other small kitchen appliances, like an instant hot water dispenser

• - 6-YEAR LIMITED SERVICE WARRANTY: Backed by InSinkErator 6-Year "We Come to You" Limited Service Warranty

• - INSINKERATOR BOOST System with Septic Guard (BST-SG) FOR INSINKERATOR GARBAGE DISPOSALS: 7.82-in tall by 4-in square BOOST Accessory device, Septic Guard solution, mounting kit and screws, power adapter, disposal dishwasher inlet plug, tubing, etc.

• - ADDED ASSURANCE FOR HOMES ON A SEPTIC SYSTEM**: Septic Guard liquid formula that’s non-corrosive to plumbing and scientifically proven to support the digestion of solids, helping to break down food waste buildup in your home’s septic system** and pipes

• - HELPFUL ODOR REDUCER: Septic Guard liquid with fresh citrus scent that helps reduce undesired kitchen sink odors

• - DIY INSTALL AND REFILL CHANGE: INSINKERATOR BOOST System dishwasher inlet adapter that attaches directly to the disposal dishwasher inlet plug with option to use power adapter or four AA batteries; click-into-place design for Septic Guard refill bottles

Description

Features

• - The information below is per-pack only

• - POWERFUL FOOD WASTE PROCESSING: Features a 2,600 RPM (revolutions per minute) Vortex motor to provide fast, powerful grinding of everyday food scraps to significantly reduce disposal jamming

• - COMPACT DESIGN: The 1/2 HP (horsepower) garbage disposal is lightweight for easy installation and maximizes valuable under-sink space

• - SIMPLE SWAP: Effortlessly replaces most existing garbage disposals, including non-Moen brands, with its pre-installed power cord

• - SEPTIC SAFE: Safe to use with properly-sized septic tanks

• - ECO-FRIENDLY: Reduce waste sent to landfills with this easy-to-install garbage disposal for your kitchen sink

• - BUILT TO LAST: The Moen garbage disposal 5-year limited warranty with in-home service guarantees help is there when you need it

Description

The Weller WE1010 soldering station is a powerful and easy to use solution for both professional and DIY users. It features digital control with an easy-to-read LCD screen and three buttons for easy temperature control. The station offers a temperature stability of +/- 4°F (+/- 2°C), which exceeds MIL specifications and ensures consistently high quality solder joints. The ergonomic soldering iron has a lightweight, pen-like design with a co-molded handle for comfortable working. The tool-less tip change allows for quick and safe tip replacement. The flexible silicone cable is heat resistant and meets the highest industry standards for mechanical strength. The WE1010 is ESD safe and CE and UL certified, making it ideal for professional use. Key applications include electronics repair, prototyping and general soldering.

Features

• - Gets your soldering job done faster. The digital 85-watt soldering station impresses with its high performance, short heating and recovery times, enabling efficient and speedy work

• - Intuitive navigation The digital WE soldering station boasts a modern design, an easy-to-read LCD screen, push buttons for temperature control, a front panel power switch, and intuitive software navigation.

• - Easy to handle high performance iron. The high-performance 70 W soldering iron has an ergonomic, lightweight design with a co-molded grip, tool-less tip change, and an improved safety rest

• - Easy tip change and low total cost of ownership Change hot tips by hand with the plastic knurled nut, and enjoy top performance and long life with the soldering set and Weller ET series tips, available in various high-quality, affordable options

• - Temperature stability The temperature lock stabilizes heat to +/- 4°F / +/- 2°C (exceeding MIL Spec), protecting tips and components while ensuring reliable, high-quality solder joints

• - Safe handling The ESD-safe WE station and iron, certified for electrical safety (CE, UL), have a heat-resistant silicon cable and meet top industry standards for professional use

• - Standby mode Station automatically powers down to a given temperature when not in use

• - Automatic set-back Sets temperature back automatically when not in use to save energy and increase tip lifetime

• - Password-protected All settings can be secured with a password, so that predefined settings can be maintained in order to ensure process quality

Description

Features

• - UPGRADED 200 GPD - The RCC2 features a high-capacity 200 GPD RO membrane that delivers faster flow, making it an excellent choice for large households and office use.

• - PATENTED FAUCET DESIGN - The patented top-mounted faucet fastener allows for easy countertop installation, eliminating the need to reach under the counter during setup.

• - SEE WHAT’S CAUGHT - The transparent first-stage filter housing makes it easy to monitor contaminant buildup, ensuring timely filter changes.

• - EFFECTIVE FILTRATION - Reduces TDS, PFAS, chlorine, asbestos, barium, cadmium, chromium, copper, fluoride, lead, selenium, and over 1,000 other contaminants.

• - DIY-FRIENDLY INSTALLATION - The RO water system features a DIY-friendly design with quick-fitting connections, a clear manual, and step-by-step videos for a hassle-free setup.

• - TRUSTED SUPPORT & WARRANTY - Backed by iSpring’s U.S.-based technical team with nearly 20 years of industry experience, plus a 1-year manufacturer warranty and lifetime tech support.

• - BUILT TO LAST, EASY TO MAINTAIN - Durable components ensure long-term reliability. The compact design fits under most sinks and runs without electricity. A built-in check valve prevents backflow and leakage for safe operation.

Description

Step up to designer styles and superior security with Kwikset Signature Series products. When it comes to contemporary design, Pismo door knobs hit the mark with clean lines, smooth surfaces and a sleek, minimalist aesthetic. The square profile adds to the modern look and aligns with today's design trends. Elevate your space with Pismo and turn every door into a chic style statement. This privacy knob/lever is best used in interior bedroom and bathroom applications where privacy is required. Both knobs/levers are operated by the thumb turn on the inside. The outside knob/lever is unlocked by an emergency key. The rich tones of Matte Black add the finishing touch to this product.

Features

• - 10 PACK KEYED ENTRY: Use on doors where extra security is needed, turn piece interior locking, exterior locking using a key. Recommended for exterior-facing doors

• - SMARTKEY SECURITY: Kwikset’s SmartKey Security technology protects against advanced break-in techniques and allows you to re-key your lock yourself in seconds

• - EASY INSTALL REVERSIBLE LEVER: Do it yourself, installs in minutes with just a screwdriver. Reversible handle for left- or right-handed doors, detailed directions provided

• - FITS STANDARD DOORS: Fits standard size doors 1-3/8" to 1-3/4" thick, latch backset adjusts to either 2-3/8" or 2-3/4" with just a twist during installation

• - BOX INCLUDES: 10 Entry levers, latch with round and square front options or drive-in collar, strike, SmartKey tool, 2 Kwikset keys, rosette, screws and Allen wrench

Description

Features

• - The information below is per-pack only

• - LIGHT OUTPUT: 245 lumens - 60 watts - 2200 kelvin (candlelight white) - 3,000 hour bulb life

• - CANDLELIGHT WHITE: 2200 kelvin candlelight white color, providing a traditional warm and cozy ambiance

• - SPHERICAL SHAPE: standard variation of G30 globe bulb allows ample space for increased illumination

• - TUNGSTEN FILAMENTS: specially designed & shaped bulbs with Imported Tungsten Filaments gives your home that extra special unique & warm touch

• - BULB SPECS: fits a standard medium E26 base light socket

• - ✔ SPHERICAL SHAPE: standard variation of G30 globe bulb allows ample space for increased illumination

• - ✔ TUNGSTEN FILAMENT: specially designed with imported Tungsten Filaments gives your home that extra special unique warm touch!

• - ✔ DESIGN: perfect for that historic or vintage restoration project to create that antique feeling!

• - ✔ BULB BASE: fits a standard medium E26 base light socket

Description

Zurn ZERK-CCP E-Z AquaSense E-Z Flush Retrofit Kit with Complete Plastic Cover in Chrome Zurn's AquaSense E-Z Flush Retrofit Kit is the easiest way to upgrade to a sensor flush valve. Replace any existing Zurn or handle-operated diaphragm flush valve with the E-Z Flush Kit for a touchless experience. It delivers automatic sensor flushing and can be used as a replacement for both urinal and water closest systems. The E-Z Flush features reliable motor gear-driven operation that provides consistent performance. An adjustable sensor range delivers flexibility and a well-timed flush for any environment. The kit comes complete with two wrenches for a quick and easy installation. The ZERK-CCP is made of complete chrome-plated plastic. It's the perfect solution for a seamless upgrade to hands-free operation that's durable for commercial and high-traffic environments. Zurn Z6003-YB-YC Aquaflush Exposed Manual Diaphragm Flush Valve with 3.5 GPF, Sweat Solder Kit, and Cast Wall Flange in Chrome Engineered for performance, Zurn’s Aquaflush Exposed Manual Diaphragm Flush Valves provide consistent and reliable urinal operation. The Z6003-YB-YC features a streamlined design while providing high-level performance, unsurpassed water conservation, and long-lasting savings. It is available with flush rates ranging from the standard 1.5 gpf to an extra water-saving flush rate of 0.5 gpf. Each flush valve contains a quiet GO BLUE dual-seal diaphragm with a clog-resistant bypass and chloramine-resistant seals for an extended lifespan and lower maintenance costs. The durable Aquaflush series comes with a sweat solder kit and a cast wall flange and features a highly polished chrome-plated exterior. The Z6003-YB-YC is a water-saving solution for any commercial retrofit or new construction project.

Features

• - Product 1: Upgrade handle-operated manual flush valves with touchless sensor technology

• - Product 1: Improves hygiene and sanitation by eliminating touch points

• - Product 1: Quick installation under 3 minutes

• - Product 1: Multi-purposed to fit urinals and water closets from Zurn and other manufacturers

• - Product 2: Standard 11-1/2 in. rough-in and 3/4" top spud

• - Product 2: Exposed sweat solder kit

• - Product 2: Polished chrome-plated finish cast wall flange

• - Product 2: Clog-resistant triple filter diaphragm

Description

Zurn ZERK-CCP E-Z AquaSense E-Z Flush Retrofit Kit with Complete Plastic Cover in Chrome Zurn's AquaSense E-Z Flush Retrofit Kit is the easiest way to upgrade to a sensor flush valve. Replace any existing Zurn or handle-operated diaphragm flush valve with the E-Z Flush Kit for a touchless experience. It delivers automatic sensor flushing and can be used as a replacement for both urinal and water closest systems. The E-Z Flush features reliable motor gear-driven operation that provides consistent performance. An adjustable sensor range delivers flexibility and a well-timed flush for any environment. The kit comes complete with two wrenches for a quick and easy installation. The ZERK-CCP is made of complete chrome-plated plastic. It's the perfect solution for a seamless upgrade to hands-free operation that's durable for commercial and high-traffic environments. Zurn Zerk-Cpm Aquasense E-Z Flush® Retrofit Kit With Metal Cover, Chrome Zurn's AquaSense E-Z Flush Retrofit Kit is the easiest way to upgrade to a sensor flush valve. Replace any existing Zurn or handle-operated diaphragm flush valve with the E-Z Flush Kit for a touchless experience. It delivers automatic sensor flushing and can be used as a replacement for both urinal and water closest systems. The E-Z Flush features reliable motor gear-driven operation that provides consistent performance. An adjustable sensor range delivers flexibility and a well-timed flush for any environment. The kit comes complete with two wrenches for a quick and easy installation. The ZERK-CPM is made of a metal cover in a highly polished chrome-plated finish. It's the perfect solution for a seamless upgrade to hands-free operation that's durable for commercial and high-traffic environments. Zurn's AquaSense E-Z Flush Retrofit Kit is the easiest way to upgrade to a sensor flush valve. Replace any existing Zurn or handle-operated diaphragm flush valve with the E-Z Flush Kit for a touchless experience. It delivers automatic sensor flushing and can be used as a replacement for both urinal and water closest systems. The E-Z Flush features reliable motor gear-driven operation that provides consistent performance. An adjustable sensor range delivers flexibility and a well-timed flush for any environment. The kit comes complete with two wrenches for a quick and easy installation. The ZERK-CPM is made of a metal cover in a highly polished chrome-plated finish. It's the perfect solution for a seamless upgrade to hands-free operation that's durable for commercial and high-traffic environments.

Features

• - Product 1: Upgrade handle-operated manual flush valves with touchless sensor technology

• - Product 1: Improves hygiene and sanitation by eliminating touch points

• - Product 1: Quick installation under 3 minutes

• - Product 1: Multi-purposed to fit urinals and water closets from Zurn and other manufacturers

• - Product 2: Upgrade handle-operated manual flush valves with touchless sensor technology

• - Product 2: Improves hygiene and sanitation by eliminating touch points

• - Product 2: Quick installation under 3 minutes

• - Product 2: Multi-purposed to fit urinals and water closets from Zurn and other manufacturers

Description

Padded Comfort Stilt Straps for Drywall, Painting - Fits Dura-Stilt, Marshalltown, Import Brands. Durable and Comfortable

Features

• - ULTRA Comfortable, Wide, Padded Foam Stilt Leg Bands/Calf Straps - One Size Fits All

• - Fits SINGLE LEG POLE STYLE stilts from Pentagon, GypTool, Dura-Stilt, GoPlus, Sur-Stilt, SurPro, Marshalltown and most every other stilt brand.

• - 4" wide padded strap made from 1680 Ballistic Nylon and industrial strength hook and loop fasteners to dramatically increase your comfort while wearing stilts

• - Bandas / Correas Acolchadas Para Zancos de Drywall or Pintura - Duraderos y Comodos! Durable and Comfortable!

• - 2 Straps per package - for full set of stilts. Made in America

Description

Features

• - The information below is per-pack only

• - Classic 3-hole configuration

• - 12 sheet capacity for bulk punching

• - Durable metal construction for longevity

• - Rubber base for desktop protection + stability

• - Easy-clean chip tray prevents mess

Description

Features

• - The information below is per-pack only

• - Ideal for use on ferrous, non-ferrous metal, wood, concrete, masonry and other such surfaces to provide rust protection and a tough attractive finish that withstands weathering

• - High quality, durable oil-based formula maintains consistent, corrosion-resistant color despite the elements

• - Covers up to 14 sq ft, dries to touch in 15 minutes and recoats within an hour for quick project completion

• - Commercial, industrial paint formula features a high output tip that can be sprayed at any angle

• - Gloss finish provides a new look for surfaces and withstands demanding, heavy-use environments

Description

Features

• - The information below is per-pack only

• - Ideal for use in restricted areas where a T handle won't fit.

• - Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2".

• - Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards.

• - Sockets contained on a vinyl holder.

• - Ideal for use in areas where a T handle won't fit

• - Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch

• - Sockets contained on a vinyl holder

• - All sockets are available individually

Description

Zurn AquaSense® E-Z Flush® Retrofit Kit with Metal Cover in Chrome Zurn ZERK-CPM E-Z Flush Automatic Retrofit Kit, Small, Chrome. The Zurn ZERK-CPM AquaSense E-Z Flush Automatic Retrofit Kit for Toilets and Urinals is designed to provide automatic flushing for urinal and/or water closet flush valves. Zurn Z6000-YB-YC Aquaflush Flush Valve 3.5 Gallon with Cast Wall Flange And Sweat Kit. Diaphragm operated brass flush valve with a polished chrome exterior complete with wall flange with set screw, sweat solder kit, control stop cover, vacuum breaker, flush tube and fixture spud escutcheon and securing nut closet: 3.5 GPF, 1-1/2 inch top spud coupling urinal: 1.5 GPF, 3/4 inch top spud coupling.

Features

• - Product 1: Chrome-Plated Metal E-Z Flush Sensor unit

• - Product 1: Installs in minutes and provide years of trouble free operation

• - Product 1: 3-year battery life

• - Product 1: 3-year warranty

• - Product 2: Manual Flush Valves

• - Product 2: Clog-resistant linear bypass diaphragm

• - Product 2: Chemical resistant gaskets and seals for extended service life with lower maintenance costs

• - Product 2: Manual ADA compliant handle with no-leak seal technology

Description

Features

• - DRILL_BITS

• - Package_quantity: 1

• - Package_dimensions: Height: 16.4 centimeters, Length: 7.7 centimeters, Width: 7.8 centimeters

• - Grade YG10X Tungsten Carbide Burrs + USA Silver For Ultimate Strength + Full 1 Year Warranty